This is a fully functional Thermotron SM-8C Temperature/Humidity Test Chamber (-65C to +170C, 20% to 95% R.H., 8 cu.ft.) in great cosmetic and working conditions. This environmental chamber has been very well maintained and was recently fully tested and validated by our engineer.

Different temperatures with different humidity levels were tested in accordance with certain IEC criteria, including the most used temperature humidity conditions: 40C / 65%RH, 65C / 95%RH, 85C / 85% RH, -65C, -40C, 25C, 120C, and 150C. The chamber is a complete ready-to-use system with everything needed for a lab testing operation. Technical support will be provided to the buyer for the initial applications, if requested. The functionalities of the compressor, heating elements, water supply and drain system, and humidity and temperature control system have just been thoroughly checked and validated. The chamber uses 208 - 230 Volts, single phase, 60 Hz power. The operator's electronic manuals for both the chamber and the controller will be provided with the chamber.

Temperature and humidity conditions are controlled by a two channel 2800 Programmer/Controller. Channel 1 senses the chamber temperature using a dry bulb thermocouple input. Its outputs control the heating and cooling systems. Channel 2 senses the chamber humidity. Its outputs control the humidity system’s steam generator and dehumidify coil.

Specifications:

Condition: Refurbished

Product: Thermotron SM-8C Temperature/Humidity Test Chamber

Working Space: 8 cu.ft. /227L

Temperature Range: -65C to +170C

Humidity Range: 20% - 95%

Internal Working Dimensions: 24"W x 24"D x 24"H

Exterior Chamber Dimensions: 35"W x 49"D x 73"H

Programmable Controller: Two channel 2800 Program / Controller

Access Port: Two (right/left side)

Window and light: Viewing Window with Interior Light

Voltage: 230 V, 1Ph

Amps: 25A

Shipping Weight: ~ 975 lb.

Warranty : 60-Day. See terms

Handling/palletizing/crating charge: $400

​